Rev. 07/27/22 Scan Specifications for the 2022 Ohio IT 40P Important Note The following document (2022 IT 40P) contains grids for placement of information on this specific tax form. To accurately print, do not reduce the size, rotate or center this document. Doing so will jeop- ardize the integrity of the grid. When printing from Adobe Reader, select “None” for “Page Scaling,” which is under “Page Handling.” The 2022 IT 40P vouchers must be initially submitted by August 31, 2022 and approved no later than Oct. 14, 2022. Ohio Department of Taxation 4485 Northland Ridge Blvd. Columbus, OH 43229 tax.ohio.gov |
Ohio Department of Taxation Scannable Tax Forms 1. Introduction: The Ohio Department of Taxation (ODT) prescribes the format of Ohio tax returns and forms. The department’s primary objective is to ensure that the tax forms are compatible with the department’s automated remittance processing systems and can be processed in an efficient, accurate and economical manner. These guidelines are for computerized tax processors, software developers, computer programmers, commercial printers, and others who develop and use substitute and reproduced tax forms. 2. Definitions: 2.01 Scannable Tax Forms Software generated scannable forms are similar to the official ODT tax forms with the following exceptions: 1) the taxpayer-entity information layout, 2) a scanline that contains the taxpayers’ tax data, and 3) a variable data 2D barcode that contains the taxpayer's data. 2.02 Substitute Tax Forms Software generated substitute forms are exact replicas of the official ODT tax forms. ODT must be able to process substitute tax forms in the same manner as the official forms. Substitute tax forms that are electronically produced must duplicate the appearance and layout of the official form including size of margins, special keying symbols and line numbers. 2.03 Demographic Fields The area where the name, address, account number/Social Security number (SSN) are printed. 2.04 Static Text The text, including item numbers, specifying the information to be entered into a data field. Static text must not go into capture areas. 2.05 OCR-Readable Field The scanline field that will be read using Optical Character Recognition (OCR) technology. Subsequent OCR fields include the SSN fields, three character last name fields, and payment amount. 2.06 Record Layout A 6-line-per-inch vertical (row) and 10-characters-per-inch horizontal (column) spacing grid, specifying the exact placement of all fields and characters on the facsimile form, is provided with each form specification to assist in proper spacing and alignment. 2.07 Capture Area The specific space on the form where an OCR-Readable field is captured. 3. Specifications: 3.01 Field Length Each form must contain the exact number of Demographic Fields and Capture Areas as the department-issued form. 3.02 Name and Address Name and address must be placed in the row and column specified in the grid format provided with each form. 3.03 Account/SSN The account or SSN(s) must be printed with spaces in the exact locations specified in the record layout. 3.04 Scanline Font The OCR scanline must be printed using a fixed 10-pitch, OCR-A (12-point size) font. No boldface or italicized font. No special characters. |
3.05 Scanline Position The bottom of the characters in the scanline must be ½ of an inch from the bottom edge of the form and 1 inch from the right edge. See grid layout and Scanline Specifications Format for exact location of scanline. 3.06 Total Remittance Field This field is read by our remittance-processing equipment and requires a dollar sign ($) followed by a space preceding the remitted amount. The total remittance field must also include a decimal point to separate the dollar and cents digits. (Example: $ 12345.00) 3.07 OCR Underlining or enclosing OCR readable data fields is not acceptable nor are vertical bars to be used to separate dollar and cents fields. 3.08 2D Barcode (PDF 417) 2D barcodes will consist of the "Tax Year", "Form Identifier", "VRN", and certain taxpayer specific variable data within the scanline. Both the Schema and the 2D Barcode Instructions provided must be referenced for data guidelines and placement within the 2D barcode. The PDF 417 barcode will measure 1.75" wide X 1.25" high, follow grid layout for positioning. 3.09 Back of Form Vouchers must be printed on one side only. 3.10 Shading The use of shading or solid black areas for sidebars, headings or other areas is not permitted unless specified on tax return samples. 3.11 Reference Marks On all scannable returns and vouchers there are target marks on the form. Exact locations of the target marks are listed on the grid layout for each form. Target marks must be a solid black circle and should be .2” in diameter. 3.12 Software Developer Identification The software developer identification is a two-digit vendor registration number (VRN) that will be assigned to each developer. The identification will be assigned to you by the Ohio Department of Taxation. The two-digit VRN refers to the developer who designs the software to perform the tax calculations and to the developer who designs the form templates. The VRN must be printed on each document in the exact area specified on the form grid. The use of a standard font size is acceptable. This is the same two-digit number assigned to you on your full-page scannable forms. For any questions or VRN assignments, email: Forms@tax.state.oh.us 3.13 Date Generated Indicates the date the voucher was generated. 4. Testing: 4.01 Pre-release testing All documents must be tested on ODT equipment before production runs. ODT will accept PDFs of voucher submissions. Testing instructions and information can be found on the “2D Barcode Instructions” page. 4.02 Printed Voucher All non-applicable fields on the printed voucher must be left blank. The same guidelines do not apply to the scanline. Vendors must reference the scanline section of these specifications for additional information. |
5. Approval Process: The Forms Unit will confirm receipt of the submission by e-mail. The Forms Unit will send notification of your approval status by e-mail when your submittal has been reviewed and tested. Allow up to 10 business days for the submission to be completely reviewed. 6. Check Digit Routine (Modulus 10) For Scanline 1) Multiply each digit of the number by 1 or 2, starting from the left and going to the right. You will start with a 1 then 2, and continue this pattern to the end of that number. 2) Add all the digits together. Do not add the sum of the totals. For example, if your numbers are 1, 3, 4 and 19 your answer will be: 1 + 3 + 4 + 1 + 9 = 18. 3) Divide the total from the digits by 10. 4) Subtract the remainder from 10. The answer is your check digit. If your remainder is zero, your check digit will always be zero. Note: This same procedure is followed for all check digit calculations throughout these specifications. Example: Check digit calculation for SSN: Step 1 – Multiply each digit in the number by weights 121212. 1 2 3 4 5 6 7 8 9 (SSN) X 1 2 1 2 1 2 1 2 1 X 1 2 1 2 1 4 3 8 5 12 7 16 9 2 10 0 18 Step 2 – The digits of the individual products are summed. 1 + 4 + 3 + 8 + 5 + 1 + 2 + 7 + 1 + 6 + 9 = 47 Step 3 – Divide the sum by the modulus (10): 4 (quotient) (Modulus) 10 47 (sum) 40 7 (remainder) Step 4 – To compute the check digit: Modulus – Remainder = Check Digit 10 - 7 = 3(This is your check digit.) Step 5 – Append a space and the check digit to the right of the number: The complete form for the SSN is 123456789 3. |
7. Check Digit for Scanline Payment Period Form Period Check Digit 202 3IT 1040ES012 3- April 1 , 2028 3 0 022 -3June 15, 202 3 8 032 -3Sept. 15, 202 3 6 042 -3Jan. 1 , 202 6 4 4 202 3SD 100ES 012 3- April 1 , 2028 3 0 022 -3June 15, 202 3 8 032 -3Sept. 15, 202 3 6 042 -3Jan. 1 , 202 6 4 4 202 2IT 40P 052 -2April 1 , 2028 3 3 202 2SD 40P 052 -2April 1 , 2028 3 3 202 2IT 40XP 052 -2April 1 , 2028 3 3 202 2SD 40XP 052 -2April 1 , 2028 3 3 |
8. Scanline Specifications Format: 2022 IT 40P Size: 8.5” X 3.667” IT 40P is for the original income tax return payment and should populate with Ohio IT 1040. Number Character Description of Positions Length SSN 1-10 9 Check Digit for SSN 11-12 1 Voucher and Year 13-17 4 Check Digit for Voucher and Year 18-19 1 Spouse’s SSN (if single return or married filing separately, zero fill field) 20-29 9 Check Digit for Spouse’s SSN 30-31 1 Form Type 32-34 3 Placement of the Scanline: Will start on line 63 at position 42 and end at position 75. Blank spaces must be as noted. Print zeros in fields that contain no data. The scanline font is OCR-A (12-point size), 10 pitch (pica spacing). Example: 123456789X3X0522X 3 987654321X3X402 1 2 3 4 5 6 7 Important Note: Make sure that there is no masking of 1. SSN (9 digits and a space) numbers any place on the vouchers. 2. Check Digit for SSN (1 digit and a space) 3. Voucher and Year – will always be 0522 for year 2022 (4 digits and a space) 4. Check Digit for Voucher and Year (1 digit and a space) 5. Spouse’s SSN – Print zeros in field if single or married filing separately return (9 digits and a space) 6. Check Digit for Spouse’s SSN (1 digit and a space) 7. Form Type: This will remain a constant “402” on all vouchers. Note: The Cature Areas will be the tax year, first three characters of the taxpayer's last name, first three characters of the spouse's last name, taxpayer’s SSN, spouse’s SSN, and amount. |
2D Barcode (PDF 417) Instructions General Information • The Ohio IT 40P must be enabled for a PDF 417 2D barcode to include variable taxpayer data • A form enabled for 2D barcode must not allow users or practitioners the option to turn off/on the 2D barcode function • The minimum error correction code level is 4 • Optimal dpi level is 300 dpi. The mimimum dpi level is 200 dpi • Refer to schema and specifications on field length and character guidleines. • Spouse fields will be left blank on single or married filing seperate taxpayer vouchers Size and Placement on the Form • 2D barcode must be placed in the designated area indicated in the grid layout • The 2D barcode will be PDF 417 with a maximum size of 1.75 inches wide by 1.25 inches in height. The 2D barcode must fit within the designated space in the grid layout • 2D barcode must not be bigger than the allocated area Barcode Layout • Data included in the 2D barcode can be broken down into three general sections Header Tax Year • Will always be 22 for the 2022 IT 40P Form Code • Will always be 402 for the IT 40P Vendor Number • 2 digit Vendor Registration Number assigned by ODT Tax Year Tax Year • Will always be 0522 on all 2022 IT and SD 40P and 40XP vouchers Form Specific Data – Please see encoding schemas for form specific data Primary SSN • 9 digit Social Security Number of the Primary Taxpayer Spouse SSN • 9 digit Social Security Number of the Spouse • Leave blank for single or married filing seperate taxpayer vouchers First Three Letters of the Primary Taxpayer’s Last Name • First three letters of the Primary Taxpayer’s last name. Omit special characters. First Three Letters of the Spouse’s Last Name • First three letters of the Spouse’s last name. Omit special characters. • Leave blank for single or married filing seperate taxpayer vouchers Amount of Payment • Amount of the payment, including cents. Numeric only, up to 11 characters total. • Must be greater than one dollar |
Examples of 2D Barcode data streams Header 2240299 <CR> Year 0522 <CR> Primary Taxpayer’s SSN 123456789 <CR> Spouse’s SSN 987564321<CR> First Three Letters of Primary Taxpayer’s SSN CIT <CR> First Three Letters of Spouse’s SSN PUB <CR> Amount of Payment (including cents) 12345678900 <CR> *EOD* <CR> Submission Process • The deadline for 2022 Ohio IT 40P voucher approval is October 14th, 2022 • Vouchers may be submitted by email to Forms@tax.state.oh.us • The email subject line must include the vendor number, product name, tax year and voucher number in that order e.g. 12_ABCTax_ 22_402 • Submissions must include • One (1) full field sample in a PDF format • Five (5) test scenarios for the Ohio IT 40P voucher provided by the Ohio Department of Taxation. • Each test scenario must be in a separate PDF using the following naming convention: ven- dor number, product name, tax year, voucher number, test number 12_ABCTax_22_402_ Test 1 • An emailed confirmation is sent to the vendor indicating the packet was received • Submissions missing any of the items above will be rejected Testing Process • Testing of Ohio IT 40P voucher commences on July 25th, 2022. • Vouchers are reviewed in three (3) content areas - printed forms, 2D barcode data, and scanline data • A submission is approved in its entirety once all sample documents pass in all areas Printed forms • Vendor full field matches template provided in the specifications • All fields are present, formatted properly and aligned with grid layout • Test scenarios contain values specified by Ohio Department of Taxation 2D Barcode Data • Barcodes read as valid • All test scenarios can be decoded and match test scenario data exactly Scanline Data • Must meet requirements specified in scanline guidleines section of these specifications |
Notifications • Communications regarding submissions are sent from Forms@tax.state.oh.us to the vendor email address(es) on file for the product • If forms are released prior to approval, vendors must ensure that the users cannot print vouchers containing 2D barcodes and must include a visual indicator to alert the taxpayer that the voucher cannot be filed • An emailed confirmation is sent to the vendor indicating the voucher was approved • An email confirmation is sent to the vendor for packets that are rejected • Feedback is provided regarding the errors found • Resubmissions of vouchers must include all test scenarios • After the third submission of test materials, the department cannot guarantee timeliness of the review • Vouchers will be tested with applicable long form submissions. If a voucher changes before January 1, 2023, long form test scenarios will be updated to reflect the changes. Vendors will be notified of applicable changes and required to submit revised vouchers within their long form test packets |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 45 Tax Year • Do NOT send cash 46 OHIO IT 40P 88 88 88 • Do NOT fold, staple, or paper clip 47 Original Income Tax Payment Voucher 48 2022 49 50 Use UPPERCASE letters John Q. CitizenXXXXXXXXXXXXXXXXXXXX to print the first three letters of 51 Taxpayer’s Spouse’s last name 52 Jane E. PublicXXXXXXXXXXXXXXXXXXXXX last name (if filing jointly) 53 54 CIT PUB 1234 Any StreetXXXXXXXXXXXXXXXXXXXX 55 56 Any CityXXXXXXXXXXXX, US 12345-2345 57 Taxpayer’s SSN 58 Make payment payable to: Ohio Treasurer of State 99 123 45 6789 59 Sending with return - Mail to: Ohio Department of Taxation, Spouse’s SSN P.O. Box 2057, Columbus, OH 43270-2057 (only if joint filing) 987 65 4321 60 Sending without return - Mail to: Ohio Department of Taxation, 61 Amount of P.O. Box 182131, Columbus, OH 43218-2131 Payment $ 123456789.00 62 63 123456789 3 0522 3 987654321 3 402 64 65 66 |
Tax Year • Do NOT send cash OHIO IT 40P 88 88 88 • Do NOT fold, staple, or paper clip Original Income Tax Payment Voucher 2022 Use UPPERCASE letters John Q. CitizenXXXXXXXXXXXXXXXXXXXX to print the first three letters of Taxpayer’s Spouse’s last name Jane E. PublicXXXXXXXXXXXXXXXXXXXXX last name (if filing jointly) 1234 Any StreetXXXXXXXXXXXXXXXXXXXX CIT PUB Any CityXXXXXXXXXXXX, US 12345-2345 Taxpayer’s SSN Make payment payable to: Ohio Treasurer of State 99 123 45 6789 Sending with return - Mail to: Ohio Department of Taxation, Spouse’s SSN P.O. Box 2057, Columbus, OH 43270-2057 (only if joint filing) 987 65 4321 Sending without return - Mail to: Ohio Department of Taxation, Amount of P.O. Box 182131, Columbus, OH 43218-2131 Payment $ 123456789.00 123456789 3 0522 3 987654321 3 402 |
Tax Year • Do NOT send cash OHIO IT 40P • Do NOT fold, staple, or paper clip Original Income Tax Payment Voucher 2022 Use UPPERCASE letters to print the first three letters of Taxpayer’s Spouse’s last name last name (if filing jointly) Taxpayer’s SSN Make payment payable to: Ohio Treasurer of State Sending with return - Mail to: Ohio Department of Taxation, Spouse’s SSN P.O. Box 2057, Columbus, OH 43270-2057 (only if joint filing) Sending without return - Mail to: Ohio Department of Taxation, Amount of P.O. Box 182131, Columbus, OH 43218-2131 Payment |