Rev. 7/21/17 Scan Specifications for the 2017 Ohio IT 40XP Important Note The following document (2017 IT 40XP) contains grids for placement of information on this specific tax form. To accurately print, do not reduce the size, rotate or center this document. Doing so will jeop- ardize the integrity of the grid. When printing from Adobe Reader, select “None” for “Page Scaling,” which is under “Page Handling.” Ohio Department of Taxation 4485 Northland Ridge Blvd. Columbus, OH 43229 tax.ohio.gov |
Ohio Department of Taxation Scannable Tax Forms 1. Introduction: The Ohio Department of Taxation (ODT) prescribes the format of Ohio tax returns and forms. The department’s primary objective is to ensure that the tax forms are compatible with the department’s automated remittance processing systems and can be processed in an efficient, accurate and economical manner. These guidelines are for computerized tax processors, software developers, computer programmers, commercial printers, and others who develop and use substitute and reproduced tax forms. 2. Definitions: 2.01 Substitute Tax Forms – A form other than the official ODT form that is computer-produced, computer-programmed or commercially typeset and printed. ODT must be able to process substitute tax forms in the same manner as the official forms. Substitute tax forms that are electronically produced must duplicate the appearance and layout of the official form including size of margins, special keying symbols and line numbers. 2.02 Facsimile (Text Mode) Forms – For filing purposes, ODT does not accept dot matrix facsimile signature returns and schedules. They do not contain the data-entry symbols and other requirements necessary for processing. Companies must clearly print in the top margin of electronically processed text mode forms: “DO NOT FILE THIS FORM.” 2.03 Scannable Tax Forms – The computer-prepared scannable forms are similar to the official ODT tax forms with the following exceptions: 1) the taxpayer-entity information layout and 2) a scanline that contains the taxpayers’ tax data. 2.04 Reproduced Tax Forms – Reproduced tax forms are photocopies of the official ODT forms. ODT will accept reproductions of official forms if the reproductions are: 1) Facsimiles of the official form produced by photo-offset, photoengraving, photocopying or other similar reproduction processes; 2) Printed in black ink on white paper of substantially the same weight, texture and quality as the official forms; 3) Legible in both the original text of the form and the filled-in data; AND 4) The same dimensions as the official form, including the paper and the image produced on it. ODT will accept one-sided reproduced forms even if the official form is two-sided. However, ODT prefers two-sided reproduced forms that result in the same page arrangements as the official form. You may not file reproduced tax forms that do not meet the preceding guidelines. Reproduced tax forms that deviate from the official forms are considered substitute tax forms. 2.05 ID Field – The area where the name, address, account number/Social Security number (SSN) are printed. 2.06 ICR-Readable Fields – All fields that will be read using Intelligent Character Recognition (ICR) technology. |
2.07 Line Item Text – The text, including item numbers, specifying the information to be entered into a data field. 2.08 OCR-Readable Field – The scanline field that will be read using Optical Character Recognition (OCR) technology. 2.09 Record Layout – A 6-line-per-inch vertical (row) and 10-characters-per-inch horizontal (column) spacing grid, specifying the exact placement of all fields and characters on the facsimile form, is provided with each form specification to assist in proper spacing and alignment. 2.10 Data Field – The specific space on the form where a numeric figure is entered. 3. Specifications: 3.01 Field Length – Each form must contain the exact number of ID fields, line item texts and data fields, as the department-issued form. 3.02 Signature – The signature, title and date area must be formatted in the same manner as the department- issued form. 3.03 Name and Address – Name and address must be placed in the row and column specified in the grid format provided with each form. 3.04 Account/SSN – The account or SSN(s) must be printed with spaces in the exact locations specified in the record layout. 3.05 Scanline Font – The OCR scanline must be printed using a fixed 10-pitch, OCR-A (12-point size) font. The use of Courier or OCR-B font is not permitted. 3.06 Scanline Position – ODT remittance scanline reads from right to left. The bottom of the characters in the scanline must be ½ of an inch from the bottom edge of the form and 1½ inches from the right edge. See grid layout and Scanline Specifications Format for exact location of scanline. 3.07 ICR – Dollar signs ($) are not permissible in ICR-readable fields. Commas and periods are not allowed as separators between the digits in ICR-readable fields. ICR fields are defined in the record layout of each form. 3.08 Total Remittance Field – This is the remittance line on the form that shows the tax due amount and payment submitted with the form. This field is read by the Courtesy Amount Reader (CAR) on our remittance-processing equipment and requires a dollar sign ($) followed by a space preceding the remitted amount. The total remittance field must also include a decimal point to separate the dollar and cents digits. (Example: $ 12345.00) 3.09 OCR/ICR Fields – Underlining or enclosing OCR/ICR readable data fields is not acceptable nor are vertical bars to be used to separate dollar and cents fields. |
3.10 Finished Form Size – Form size is as specified in the grid layout for each form. Extraneous borders are not permitted. Edges MUST be trimmed to meet specifications. DO NOT HAND-CUT BOTTOM OR RIGHT SIDE OF FORM. 3.11 Paper Requirement – The paper must be white, high-quality bond paper with a minimum weight between 20 and 24 pounds. 3.12 Back of Form – Forms must be printed on one side only, unless the form is a two sided form. If two-sided, see section 2.04. 3.13 Inks – Forms must be printed using black ink, non-MICR (non-ferrous) ink or toner. 3.14 Shading – The use of shading or solid black areas for sidebars, headings or other areas is not permitted unless specified on tax return samples. 3.15 Reference Marks – On all scannable returns and vouchers there are target marks on the form. Exact locations of the target marks are listed on the grid layout for each form. Target marks must be a solid black box and should be .2”W x .167”H. 3.16 NEW for 2017/2018 vouchers: Software Developer Identification – The software developer identification is a two-digit vendor registration number (VRN) that will be assigned to each developer. The identification will be assigned to you by the Ohio Department of Taxation. The two-digit VRN refers to the developer who designs the software to perform the tax calculations and to the developer who designs the form templates. The VRN must be printed on each document in the exact area specified on the form grid. The use of a standard font size is acceptable. This is the same two-digit number assigned to you on your full-page scannable forms. For any questions or VRN assignments, email: Forms@tax.state.oh.us 4. Testing: All documents must be tested on ODT equipment before production runs. The ODT requests a certain amount (see section 8 for quantities) of test samples (cut to exact size) with the appropriate scanline and all data fields filled. Test documents must be submitted for approval to: Ohio Department of Taxation Forms Unit 4485 Northland Ridge Blvd. Columbus, OH 43229 Note: When submitting your forms for approval, include form STF – Approval Request for Scannable Tax Forms with your order. This will allow us to communicate any required changes to a contact person within your organization. 5. Approval Process: After you have submitted approval form STF, the Forms Unit will confirm receipt. Allow at least two weeks for the Forms Unit to review and approve your order. You will receive written confirmation when your submittal has been approved. |
6. Check Digit Routine (Modulus 10) For Scanline 1) Multiply each digit of the number by 1 or 2, starting from the left and going to the right. You will start with a 1 then 2, and continue this pattern to the end of that number. 2) Add all the digits together. Do not add the sum of the totals. For example, if your numbers are 1, 3, 4 and 19 your answer will be: 1 + 3 + 4 + 1 + 9 = 18. 3) Divide the total from the digits by 10. 4) Subtract the remainder from 10. The answer is your check digit. If your remainder is zero, your check digit will always be zero. Note: This same procedure is followed for all check digit calculations throughout these specifications. Example: Check digit calculation for SSN and school district number: Step 1 – Multiply each digit in the number by weights 121212. 1 2 3 4 5 6 7 8 9 (SSN) 2 5 0 9 (school district number) X 1 2 1 2 1 2 1 2 1 XX 1 1 22 1 1 22 0 1 4 3 8 5 12 7 16 9 2 2 1010 0 180 18 Step 2 – The digits of the individual products are summed. 1 + 4 + 3 + 8 + 5 + 1 + 2 + 7 + 1 + 6 + 9 = 47 2 + 1 + 0 + 0 + 1 + 8 = 12 Step 3 – Divide the sum by the modulus (10): 4 (quotient) 1 (quotient) (Modulus) 10 47 (sum) (Modulus) 10 12 (sum) 40 10 7 (remainder) 2 (remainder) Step 4 – To compute the check digit: Modulus – Remainder = Check Digit Modulus – Remainder = Check Digit 10 - 7 = 3 (This is your check digit.) 10 - 2 = 8 (This is your check digit.) Step 5 – Append a space and the check digit to the right of the number: The complete form for the SSN is 123456789 3 and for the school district number is 2509 8. |
7. Check Digit for Scanline Payment Period Form Period Check Digit 2018 IT 1040ES 0118 - April 17, 2018 0 0218 - June 15, 2018 8 0318 - Sept. 17, 2018 6 0418 - Jan. 15, 2019 4 2018 SD 100ES 0118 - April 17, 2018 0 0218 - June 15, 2018 8 0318 - Sept. 17, 2018 6 0418 - Jan. 15, 2019 4 2017 IT 40P 0517 - April 17, 2018 3 2017 SD 40P 0517 - April 17, 2018 3 2017 IT 40XP 0517 - April 17, 2018 3 2017 SD 40XP 0517 - April 17, 2018 3 |
8. Scanline Specifications Format: 2017 IT 40XP Size: 8.5” X 3.667” Number Character Description of Positions Length SSN 1-10 9 Check Digit for SSN 11-12 1 Voucher and Year 13-17 4 Check Digit for Voucher and Year 18-19 1 Spouse’s SSN (if single return or married filing separately, zero fill field) 20-29 9 Check Digit for Spouse’s SSN 30-31 1 Form Type 32-34 3 Placement of the Scanline: Will start on line 63 at position 37 and end at position 70. Blank spaces must be as noted. Print zeros in fields that contain no data. The scanline font is OCR-A (12-point size), 10 pitch (pica spacing). Example: 123456789X3X0517X 3 987654321X3X424 Important Note: Make sure that there is no masking of numbers anyplace on the vouchers. 1 2 3 4 5 6 7 1. SSN (9 digits and a space) 2. Check Digit for SSN (1 digit and a space) 3. Voucher and Year – will always be 0517 for year 2017 (4 digits and a space) 4. Check Digit for Voucher and Year (1 digit and a space) 5. Spouse’s SSN – print zeros in field if single or married filing separately return (9 digits and a space) 6. Check Digit for Spouse’s SSN (1 digit and a space) 7. Form Type: This will remain a constant “424” on all vouchers. (3 digits) Note: The ICR-readable fields will be the first three letters of the taxpayer’s last name, the first three letters of the spouse’s last name, and the taxpayer’s and spouse’s SSNs. Single and joint filers must be represented in a minimum of 5 test samples (20 test samples is the maximum amount) with at least two different names and addresses. |
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 45 Rev. 7/17 46 OHIO IT 40XP Taxable Year Do NOT fold check or voucher. Income Tax Payment Voucher for an Amended Return 47 • Do NOT staple or paper clip. 48 • Do NOT send cash. Use UPPERCASE letters 2017 to print the first three letters of 49 50 Taxpayer’s Spouse’s last name 51 last name (only if joint filing) John Q. CitizenXXXXXXXXXXXXXXXXXXXX PUB 52 Jane E. PublicXXXXXXXXXXXXXXXXXXXXX CIT 53 1234 Any StreetXXXXXXXXXXXXXXXXXXXX 54 Any CityXXXXXXXXXXXX, US 12345-2345 Taxpayer’s123 45 6789 SSN 55 Include 56 • thisvoucher with youramended2017 Ohio income taxSpouse’s SSN return. payment for your • Make payment payable to: Ohio Treasurer of State (only if joint filing) 987 65 4321 57 • Sending with amended return - Mail to: Ohio Department of Taxation, P.O. Box 2057, Columbus, OH 43270-2057 • Sending without amended return - Mail to: Ohio Department of Taxation, P.O. Box 182131, Columbus, OH 43218-2131 58 Amount of 59 $ 123456789.00 Payment 60 Vendor’s Registration 61 Number 99 62 63 123456789X3X0517X3X987654321X3X424 64 65 66 |
Rev. 7/17 OHIO IT 40XP Taxable Year Do NOT fold check or voucher. Income Tax Payment Voucher for an Amended Return • Do NOT staple or paper clip. • Do NOT send cash. Use UPPERCASE letters 2017 to print the first three letters of Taxpayer’s Spouse’s last name last name (only if joint filing) John Q. CitizenXXXXXXXXXXXXXXXXXXXX Jane E. PublicXXXXXXXXXXXXXXXXXXXXX CIT PUB 1234 Any StreetXXXXXXXXXXXXXXXXXXXX Any CityXXXXXXXXXXXX, US 12345-2345 Taxpayer’s123 45 6789 SSN Include • thisvoucher with youramended2017 Ohio income taxSpouse’s SSN return. payment for your • Make payment payable to: Ohio Treasurer of State (only if joint filing) 987 65 4321 • Sending with amended return - Mail to: Ohio Department of Taxation, P.O. Box 2057, Columbus, OH 43270-2057 • Sending without amended return - Mail to: Ohio Department of Taxation, P.O. Box 182131, Columbus, OH 43218-2131 Amount of $ 123456789.00 Vendor’s Payment Registration Number 99 123456789X3X0517X3X987654321X3X424 |
Rev. 7/17 OHIO IT 40XP Taxable Year Do NOT fold check or voucher. Income Tax Payment Voucher for an Amended Return • Do NOT staple or paper clip. • Do NOT send cash. Use UPPERCASE letters 2017 to print the first three letters of Taxpayer’s Spouse’s last name last name (only if joint filing) Taxpayer’s SSN Include • thisvoucher with youramended2017 Ohio income taxSpouse’s SSN return. payment for your • Make payment payable to: Ohio Treasurer of State (only if joint filing) • Sending with amended return - Mail to: Ohio Department of Taxation, P.O. Box 2057, Columbus, OH 43270-2057 • Sending without amended return - Mail to: Ohio Department of Taxation, P.O. Box 182131, Columbus, OH 43218-2131 Amount of Vendor’s Payment Registration Number |